Enable/disable devices via device groups

You can enable/disable devices only via the configured hardware. Unless manually enabled/disabled in the add hardware wizard, camera devices are by default enabled and all other devices are by default disabled.

Disabled devices are by default not displayed in the Overview pane.

To display all disabled devices, in the top of the Overview pane, click Filter to open the Filter tab and select Show disabled devices.

To hide disabled devices again, clear Show disabled devices.

To locate a device via the device groups to enable or disable:

1. In the Site Navigation pane, select the device.
2. In the Overview pane expand the relevant group and find the device.
3. Right-click the device, and select Go To Hardware.
4. Click the plus node to see all devices on the hardware.
5. Right-click the device you want to enable/disable, and select Enabled.