Hardware information
The hardware information is placed under the device tab containing basic information for the device. For one device there is only one hardware information as follows:
|
Setting name |
Description |
Value taken from device |
|---|---|---|
|
Name |
Manufacturer name, model name and device IP |
✓ |
|
Description |
-- |
× |
|
Model |
Manufacturer name and model name |
✓ |
|
Version |
Firmware version |
✓ |
|
Serial number |
Device serial number |
✓ |
|
Driver |
Loaded device driver:
|
× |
|
Address |
IP address |
✓ |
|
MAC address |
Device MAC address |
✓ |
Most of the hardware settings are dynamic and depend on device information.
If there is a new firmware uploaded on the device, a procedure of “Replace hardware” or “Remove then add the device in Management Client” is necessary in order to be up to date and working as expected.
Removing a device in Management Client will delete all its saved recordings.