Panasonic i-PRO Analytics

Supported Panasonic Analytics in Arcules

• Cross Line - Sends an alarm when an object moving to the specified direction crosses the line. The alarm is used by Arcules to record video and alert security staff.

• Direction - Monitors an area and sends an alarm when a moving object enters the area and moves to the specified direction. The alarm is used by Arcules to record video and alert security staff.

• Intruder - Monitors an area and sends an alarm if a moving object enters the area. The alarm is used by Arcules to record video and alert security staff.

• Loitering - Monitors an area and sends an alarm when a moving object enters the area and stays for a specified period. The alarm is used by Arcules to record video and alert security staff.

• Object - Monitors an area and sends an alarm when an object (that is, suspicious object) is left behind in the area or removed from the area. The alarm is used by Arcules to record video and alert security staff.

• Scene Change - Sends an alarm when a camera is covered with something or the camera direction changed to shoot a different scene. The alarm is used by Arcules to record video and alert security staff.

For more information on Panasonic's Intelligent Video motion detection (i-VMD) visit https://security.panasonic.com/solutions_application/application_solutions/i-vmd/.

How to Install

What is needed from Panasonic

• Compatible camera for each analytic type:

  Cross Line	Type2, Type3, Type4, Type5, Type6, Type7
  Direction	Type1, Type2, Type4, Type5, Type6, Type7
  Intruder	Type1, Type2, Type3, Type4, Type5, Type6, Type7
  Loitering	Type1, Type2, Type3, Type4, Type5, Type6, Type7
  Object	Type2, Type3, Type4, Type5, Type6, Type7
  Scene Change	Type1, Type2, Type3, Type4, Type5, Type6

• Registration key obtained and activated for the camera

Prerequisites

• Access to Panasonic camera webpage

• Access to the Panasonic camera you intend to use

• Panasonic analytic software WV-SAE200 downloaded and installed on the device

*Only software package WV-SAE200 is supported in Arcules at this time.

How to configure

Step 1: Configure the analytic directly in the camera webpage

See the Panasonic Operating Instructions - Extension Software guide for best practices on set up.

Step 2: Add the camera in Arcules and enable Camera Analytics

Refer to this guide for step by step instructions on adding a camera.

Once the camera is added, click on the device and navigate to the ANALYTICS tab. Then, click + ADD ANALYTIC.

Select Panasonic i-VMD and click ADD.

Once this operation is complete you will see the analytics you configured in the camera webpage reflected in the Camera Analytics section.

Step 3: Set up Rules for handling alarms

Click the link button to set up a Rule for any people counter analytic.

Fill in the appropriate details for your rule and define who should receive the notification when an event triggers for the alarm. You can learn more about Rules in our Rules Article.