Install XProtect VMS

The XProtect VMS installer installs all server and client components on your Milestone Husky unit. The recording server is authorized, so you are ready to use the system after installation.

您可以安装 XProtect Essential+ 的免费版。该版本可为有限数量的摄像机提供 XProtect 的有限功能。必须具有 Internet 连接才能安装 XProtect Essential+。

The recording server scans your network for hardware. Discovered devices are added automatically to your system. Cameras are preconfigured in views, and a default operator role is created. After installation, XProtect Smart Client opens s

系统可能会提示您重新启动计算机。重新启动计算机之后，根据安全设置的不同，可能会出现一条或多条 Windows 安全警告。接受这些警告，安装即完成。

  1. 从互联网 (https://www.milestonesys.com/downloads/) 下载软件，并运行 Milestone XProtect VMS Products 2024 R1 System Installer.exe 文件。
  2. 安装文件会解压。根据安全设置，将显示一个或多个 Windows® 安全警告。接受这些警告，解压将继续。
  3. 完成后，会出现 Milestone XProtect 视频管理软件安装向导。
    1. 选择安装期间使用的语言（这不是系统在安装后将使用的语言；系统在安装后将使用的语言会在之后进行选择）。单击继续。
    2. 阅读 Milestone 最终用户许可协议。选中我接受许可协议中的条款复选框，然后单击继续。
    3. 在隐私设置页面上，选择是否要共享使用情况数据，然后单击继续。

      4. 如果您希望系统的安装符合 EU GDPR，则不得启用数据收集。 有关数据保护和使用数据收集的更多信息，请参阅 GDPR 隐私指南。

      Y您之后可以随时更改您的隐私设置。 另请参阅系统设置（“选项”对话框）。

    4. 在输入或浏览许可证文件的位置中，输入来自 XProtect 提供商的许可证文件。或者，浏览找到它 或单击 XProtect Essential+ 链接下载免费许可证文件 。系统会先验证许可证文件，然后您才能继续。单击继续。

      如果您没有有效的许可证文件，可以免费获取一个。单击 XProtect Essential+ 链接下载免费许可证文件。 此时会下载免费许可证文件，而且它会显示在输入或浏览到许可证文件位置字段中。

  4. Select Single computer.

    A list of components to install appears (you cannot edit this list). Click Continue.

  5. In the Specify recording server encryption window, you can secure communication by encrypting the connections from clients and services that retrieve data streams from the recording server.

    Select a valid certificate in the list to prepare your system for secure communication using recording server data encryption. 有关详细信息，请参阅 XProtect 视频管理软件的管理员手册。

    You can also enable encryption after this installation from the Recording Server Manager tray icon in the notification area.

  6. In the Specify recording server settings window:
    1. In the Recording server name field, enter the name of the recording server. The default is the name of the computer.
    2. The Management server address field shows the address and port number of the management server: localhost:80.
    3. In the Select your media database location field, select the location where you want to save your video recording. Milestone recommends that you save your video recordings in a separate location from where you install the software and not on the system drive. The default location is the drive with the most space available.
    4. In Retention time for video recordings, define for how long you want to save the video recordings for. You can enter from between 1 and 999 days, where 7 days is the default retention time.
    5. Click Continue.
  7. In the Select file location and product language window:
    1. In the File location field, select the location where you want to install the software.
    2. In Product language, select the language in which your XProtect product should be installed.

    3. Click Install.

      The software now installs.

  8. When the installation completes, a list shows the components that are installed on the computer.

    Click Continue to add hardware and users to the system.

    If you click Close now, you bypass the configuration wizard and the XProtect Management Client opens. You can make configurations, such as add hardware and users to the system in the Management Client.

  9. In the Enter user names and passwords for hardware window, enter the user names and passwords for the hardware that you have changed from the manufacturer defaults.

    The installation program will scan the network for hardware with specified credentials and hardware with manufacturer default credentials.

    Click Continue.

  10. In the Select the hardware to add to the system window, select the hardware that you want to add to the system. Click Continue.
  11. In the Configure the devices window, you can give the hardware descriptive names by clicking the edit icon next to the hardware name. This name is then prefixed to the hardware devices.

    Expand the hardware node to enable or disable hardware devices, such as cameras, speakers and microphones.

    Cameras are enabled by default, and speakers and microphones are disabled by default.

    Click Continue.

  12. In the Add users window, you can add Windows users and basic users. These users can have either the Administrators role or the Operators role.

    Define the user and click Add.

    When you are done adding users, click Continue.

When the installation and initial configuration are done, the Configuration is complete window appears, where you see:

  • A list of cameras and devices that are added to the system
  • A list of users who are added to the system
  • Addresses to the XProtect Web Client and XProtect Mobile client, which you can copy and share with your users

When you click Close, the XProtect Smart Client opens and is ready to use.

Finally, when the Husky Assistant completes the setup process, click Finish.

Install a recording server

If you chose to use your Milestone Husky unit as a recording server in the Husky Assistant wizard, the recording server installation starts automatically while the Husky Assistant wizard runs in the background. When prompted:

  1. Select the language that you want to use during the installation. Click Continue.

  2. Select:

    • Typical to install a recording server with default values
    • Failover to install a recording server as a failover recording server, complete the steps described in Install a failover recording server
    • Custom to install a recording server with custom values

  3. Specify the recording server settings:

    • Recording server name
    • Management server address
    • Media database location for saving recordings

    Click Continue.

  4. If you selected Custom:
    1. Specify the number of recording servers that you want to install on this computer. Click Continue.

    2. Specify the service account. If needed, enter a password and confirm it. Click Continue.

  5. In the Specify recording server encryption window, you can secure communication by encrypting the connections from clients and services that retrieve data streams from the recording server.

    Select a valid certificate in the list. For more information about preparing your system for secure communication using recording server data encryption, download the XProtect VMS manual from the Milestone website (https://www.milestonesys.com/support/help-yourself/manuals-and-guides/).

    You can also enable encryption after this installation from the Recording Server Manager tray icon in the notification area.

  6. Select File location for the program file. In Product language, select the language in which you want to install the server. Click Install.

  7. The software is now installed. When the installer is complete, you see a list of successfully installed components. Click Close.

    You can check the state of the recording server from the Recording Server Manager tray icon.

  8. When the Husky Assistant completes the setup process, click Finish.

Install a failover recording server

After you have selected Failover in the recording server installation wizard, you continue installation as follows:

  1. Specify failover recording server properties. Click Continue.
  2. When installing a failover recording server, you must use the particular user account named This account. This creates the failover user account. If needed, enter a password and confirm it. Click Continue.

  3. In the Specify recording server encryption window, you can secure communication by encrypting the connections from clients and services that retrieve data streams from the recording server.

    Milestone recommends that you make the same selections as on the recording server from which this failover recording server takes over. If a certificate is selected for encryption, then the administrator must grant read access permission to the failover user on the selected certificate private key.

    For more information about preparing your system for secure communication, see:

    You can also enable encryption after this installation from the Failover Recording Server Manager tray icon in the notification area.

  4. Select File location for the program file. In Product language, select the language in which you want to install the server. Click Install.

  5. The software now installs. When the installation completes, you see a list of successfully installed components. Click Close.

    You can check the state of the failover recording server from the Failover Recording Server Manager tray icon.

  6. When the Husky Assistant completes the setup process, click Finish.