[en] Install all system components (Single computer option)
[en] The Single computer option installs the server and client components on the current computer.
중요
XProtect 2025 R3 이상의 경우 XProtect Smart Client는 비디오 관리 소프트웨어 설치 패키지에 포함되지 않으므로 별도로 다운로드해야 합니다. XProtect Smart Client 최신 버전을 다운로드하려면 https://www.milestonesys.com/download/ 사이트로 이동하십시오.
참고
Milestone 설치 전에 다음 섹션을 자세히 읽어보실 것을 권장합니다. 설치를 시작하기 전에.
참고
FIPS 설치의 경우, Windows 운영 체제에서 FIPS가 활성화되어 있으면 XProtect 비디오 관리 소프트웨어를 업그레이드할 수 없습니다. 설치하기 전, SQL Server을(를) 호스팅하는 컴퓨터를 비롯하여 비디오 관리 소프트웨어의 일부인 모든 컴퓨터에서 Windows FIPS 보안 정책을 비활성화하십시오. 그러나 2020 R3 이후 버전인 XProtect 비디오 관리 소프트웨어에서 업그레이드하는 경우, FIPS를 비활성화할 필요가 없습니다. XProtect 비디오 관리 소프트웨어가 FIPS 140-2 호환 모드에서 구동하도록 구성하는 방법에 관한 자세한 내용은 강화 안내서의 FIPS 140-2 compliance 섹션을 참조하십시오.FIPS 140-2 compliance
최초 설치 후, 구성 마법사를 계속할 수 있습니다. 하드웨어 및 구성에 따라, 레코딩 서버는 네트워크에서 하드웨어를 검색합니다. 그런 다음 시스템에 추가할 하드웨어 장치를 선택할 수 있습니다. 카메라는 뷰에 사전 구성되며, 마이크로폰과 스피커 같은 기타 장치를 활성화하는 옵션이 있습니다. 또한 운영자 역할이나 관리자 역할을 가진 사용자를 시스템에 추가하는 옵션도 있습니다. 설치 후 XProtect Smart Client 이(가) 열리고 시스템을 사용할 준비가 됩니다.
또는, 설치 마법사를 닫으면, XProtect Management Client 을(를) 열어 시스템에 하드웨어와 사용자 추가하기 같은 구성 작업을 수동으로 수행할 수 있습니다.
참고
이전 버전의 제품에서 업그레이드하는 경우, 시스템은 하드웨어를 검색하지 않거나 새 뷰와 사용자 프로필을 생성하지 않습니다.
[en] I. The installation file
인터넷에서 소프트웨어가 포함된 .iso 파일을 다운로드합니다(https://www.milestonesys.com/download/). .iso 파일을 다운로드하면 XProtect VMS 설치 프로그램이라는 DVD 드라이브로 로드됩니다.
MilestoneXProtectVMS Products [Release_Version] System Installer.exe파일을 실행합니다. 설치 파일의 압축이 풀립니다. 보안 설정에 따라 하나 이상의 Windows® 보안 경고가 나타납니다. 해당 내용을 수락하고 압축 풀기를 계속 진행합니다.완료 시 Milestone XProtect 비디오 관리 소프트웨어 설치 마법사가 표시됩니다.
[en] II. Language, end-user agreement and privacy settings
설치 중 사용할 언어 를 선택합니다(설치 완료 후 시스템에서 사용하는 언어가 아님. 시스템에서 사용하는 언어는 나중에 선택할 수 있음).
Milestone 최종 사용자 사용권 계약 을 읽습니다. 라이선스 계약의 조건에 동의 확인란을 선택합니다.
사생활 보호 설정 페이지에서 사용량 데이터 공유 여부를 선택합니다. 사생활 보호 설정을 나중에 언제든지 변경할 수 있습니다.
참고
시스템에서 EU GDPR을 준수하는 설치를 하려면 데이터 수집을 활성화해서는 안 됩니다. 데이터 보호 및 사용량 데이터 수집에 관한 자세한 내용은 GDPR 개인정보 보호지침을 참조하십시오.GDPR 개인정보 보호지침
[en] III. Components to install
[en] On the Select an installation type page, select Single computerto install the all components on this computer.
[en] IV. Password protection
시스템 구성 암호 할당 페이지에서 시스템 구성을 보호해주는 암호를 입력합니다. 시스템 복구 또는 클러스터 추가와 같이 시스템을 확장할 경우 이 암호가 필요합니다.
참고
이 암호를 저장하고 안전하게 보관하십시오. 이 암호를 잃게 되는 경우, 시스템 구성을 복구할 수 없게 될 수도 있습니다.
시스템 구성을 암호로 보호하고 싶지 않은 경우, 시스템 구성 암호를 사용하지 않기로 선택하며 시스템 구성이 암호화되지 않음을 이해했습니다 를 선택하십시오.
모바일 서버 데이터 보호 암호 할당 페이지에서 암호를 입력하여 조사를 암호화합니다. 시스템 관리자가 시스템 복구 시 또는 추가 모바일 서버로 시스템 확장 시 모바일 서버 데이터에 액세스하려면 이 암호를 입력해야 합니다.
중요
이 암호를 저장하고 안전하게 보관해야 합니다. 그렇게 하지 않는 경우 모바일 서버 데이터를 복구하지 못하게 될 수 있습니다.
조사를 암호로 보호하지 않으려면 모바일 서버 데이터 보호 암호를 사용하지 않기로 선택하며 조사가 암호화되지 않게 될 것임을 이해했습니다 를 선택하십시오.
[en] V. Recording server settings
레코딩 서버 설정 지정 페이지에서 다른 레코딩 서버 설정을 지정합니다.
레코딩 서버 이름 필드에서 레코딩 서버의 이름을 입력합니다. 컴퓨터의 이름이 기본값입니다.
관리 서버 주소 필드는 관리 서버의 주소와 포트 번호를 나타냅니다: localhost:80.
미디어 데이터베이스 위치 선택 필드에서 비디오 레코딩을 저장할 위치를 선택합니다. Milestone 은(는) 비디오 레코딩을 시스템 드라이브가 아닌, 소프트웨어를 설치한 곳과 다른 위치에 저장하도록 권장합니다. 기본 위치는 이용 가능한 공간이 가장 많은 드라이브입니다.
비디오 레코딩 보존 시간 필드에서, 레코딩의 저장 기간을 정의합니다. 1일부터 365,000 일까지 입력할 수 있으며, 기본 보존 기간은 7일입니다.
[en] VI. Encryption
암호화 선택 페이지에서 다음과 같이 통신 흐름을 암호화할 수 있습니다.
레코딩 서버와 데이터 수집기, 관리 서버 간
내부 통신 흐름을 암호화하려면 서버 인증서 섹션에서 인증서를 선택합니다.
중요
레코딩 서버에서 관리 서버로의 연결을 암호화하는 경우, 시스템은 또한 관리 서버에서 레코딩 서버로의 연결을 암호화할 것을 요구합니다.
레코딩 서버와 클라이언트 간
레코딩 서버와 레코딩 서버에서 데이터 스트림을 검색하는 클라이언트 구성 요소 간의 암호화를 활성화하려면 스트리밍 데이터 인증서 섹션에서 인증서를 선택합니다.
모바일 서버와 클라이언트 간
모바일 서버에서 데이터 스트림을 검색하는 클라어언트 구성 요소 간의 암호화를 활성화하려면 모바일 스트리밍 미디어 인증서 섹션에서 인증서를 선택합니다.
이벤트 서버 및 이벤트 서버와 통신하는 구성 요소 사이
이벤트 서버 및 이벤트 서버와 통신하는 구성 요소(LPR 서버 포함) 간 암호화를 활성화하려면, 이벤트 서버 및 확장 섹션에서 인증서를 선택합니다.
동일한 인증 파일을 모든 시스템 구성 요소에 사용하거나 시스템 구성 요소에 따라 다른 인증 파일을 사용할 수도 있습니다.
또한 알림 영역에 있는 Server Configurator 트레이 아이콘의 Management Server Manager에서 설치 후 암호화를 활성화할 수도 있습니다.
[en] VII. Server logs
[en] On the Server logs setup page, specify the following parameters:
[en] Open Telemetry Protocol (OTLP) endpoint
[en] Log language - the display language for the logs
[en] Log level - select between Standard (uses less storage) or Extended (collects more data)
[en] Retention period - how long the database should keep the log entries
[en] Enable or disable to use Open Telemetry Protocol for server logs.
[en] VIII. Location and language
[en] On the Select file location and product language page, do the following:
[en] In the File location field, select the location where you want to install the software.
Note
[en] If any Milestone XProtect VMS product is already installed on the computer, this field is disabled. The field displays the location where the component will be installed.
[en] In Product language, select the language in which to install your XProtect product.
[en] Click Install.
[en] The software now installs. If not already installed on the computer, Microsoft® SQL Server® Express and Microsoft IIS are automatically installed during the installation.
컴퓨터를 다시 시작하라는 메시지가 표시될 수 있습니다. 컴퓨터를 재시작한 후, 보안 설정에 따라 하나 이상의 Windows 보안 경고가 나타날 수 있습니다. 해당 내용을 수락하고 설치를 완료합니다.
[en] IX. Add hardware and users
[en] When the installation completes, a list shows the components that are installed on the computer.
[en] Click Continue to add hardware and users to the system.
Note
[en] If you click Close now, you bypass the configuration wizard and XProtect Management Client opens. You can configure the system, for example add hardware and users to the system, in Management Client.
[en] On the Enter user names and passwords for hardware page, enter the user names and passwords for hardware that you have changed from the manufacturer defaults.
[en] The installer scans the network for this hardware as well as hardware with manufacturer default credentials.
[en] Click Continue and wait while the system scans for hardware.
[en] On the Select the hardware to add to the system page, select the hardware that you want to add to the system. Click Continue and wait while the system adds the hardware.
[en] On the Configure the devices page, you can give the hardware descriptive names by clicking the edit icon next to the hardware name. This name is then prefixed to the hardware devices.
[en] Expand the hardware node to enable or disable the hardware devices, such as cameras, speakers, and microphones.
Note
[en] Cameras are enabled by default, and speakers and microphones are disabled by default.
[en] Click Continue and wait while the system configures the hardware.
[en] On the Add users page, you can add users to the system as Windows users or basic users. The users can have either the Administrators role or the Operators role.
[en] Define the user and click Add.
[en] When you are done adding users, click Continue.
[en] When the installation and initial configuration are done, the Configuration is complete page appears, where you see:
[en] A list of hardware devices that are added to the system
[en] A list of users who are added to the system
[en] Addresses to the XProtect Web Client and XProtect Mobile client, which you can share with your users
[en] When you click Close, XProtect Smart Client opens and is ready to use.