[en] Install all system components (Single computer option)
[en] The Single computer option installs the server and client components on the current computer.
重要
XProtect 2025 R3以降では、XProtect Smart ClientはVMSのインストールパッケージに含まれておらず、別途ダウンロードする必要があります。最新版の XProtect Smart Client をダウンロードするには、https://www.milestonesys.com/download/サイトにアクセスしてください。
注記
Milestoneは、インストールの前に次のセクションをよく読むことを推奨しています:インストールを開始する前に。
注記
FIPS システムでは、Windows オペレーティングシステムで FIPS が有効になっている場合、XProtect VMS をアップグレードできません。インストールする前に、VMSの構成要素となっているすべてのコンピュータ(SQL Server をホストするコンピュータも含む)でWindows FIPSセキュリティポリシーを無効にします。ただし、XProtect VMS バージョン 2020 R3 以降にアップグレードしている場合は、FIPS を無効にする必要はありません。FIPS 140-2 準拠モードで実行するように XProtect VMSを設定する方法の詳細については、ハードニングガイドの「FIPS 140-2 compliance」のセクションを参照してください。FIPS 140-2 compliance
初期インストールの後、引き続き、設定ウィザードの操作ができます。ハードウエアと構成に応じて、レコーディングサーバーがネットワーク上のハードウェアをスキャンします。その後、どのハードウェアデバイスをシステムに追加するか選択できます。カメラはビューで事前設定されており、マイクやスピーカーといったその他デバイスは、オプションで有効にできます。また、ユーザーにオペレータの役割、あるいはシステム管理者の役割を持たせてシステムに追加することも可能です。インストール後、XProtect Smart Clientが開き、システムを使用する準備が整います。
インストールウィザードを閉じると、XProtect Management Clientが開き、ハードウェアデバイスやユーザーのシステムへの追加といった手動設定が可能になります。
注記
以前のバージョンの製品からアップグレードすると、システムはハードウェアのスキャン、または新しいビューとユーザープロファイルの作成を行いません。
[en] I. The installation file
インターネットからソフトウェアの.isoファイルをダウンロードします(https://www.milestonesys.com/download/)。.isoファイルをダウンロードすると、XProtect VMSインストーラーと呼ばれるDVDドライブとして読み込まれます。
MilestoneXProtectVMS Products [Release_Version] System Installer.exeファイルを実行します。インストールファイルが展開されます。セキュリティ設定によって、1つまたは複数のWindows® セキュリティ警告が表示されます。同意すると、展開が続行されます。完了すると、Milestone XProtect VMS インストール ウィザードが開きます。
[en] II. Language, end-user agreement and privacy settings
インストール時に使用する言語を選択します(インストール後にシステムによって使用される言語ではなく、それは後で選択します)。
Milestoneエンドユーザー使用許諾契約を読みます。使用許諾契約の条項に同意しますチェックボックスを選択します。
プライバシー設定ページで、使用データを共有するかどうかを選択します。プライバシー設定は後でいつでも変更できます。
注記
システムを欧州 GDPR に準拠するインストールにしたい場合は、データ収集を有効にしないでください。データ保護と使用状況データの収集の詳細については、GDPR プライバシーガイドを参照してください。GDPR プライバシーガイド
[en] III. Components to install
[en] On the Select an installation type page, select Single computerto install the all components on this computer.
[en] IV. Password protection
システム設定パスワードの割り当てページで、システム設定を保護するパスワードを入力します。システム回復時、またはシステムを拡張する際(クラスターの追加など)、このパスワードが必要になります。
注記
このパスワードを保存して安全に維持しておく必要があります。このパスワードをなくした場合は、システム設定を回復する能力に支障が出る可能性があります。
システム設定をパスワードで保護したくない場合は、システム設定パスワードを保護しないことを選択し、システム設定が暗号化されないことを承知するを選択します。
モバイルサーバーのデータ保護パスワードを割り当てページで、パスワードを入力して調査を暗号化します。システムを復元する場合や、追加のモバイルサーバーを使用してシステムを拡張する場合、モバイルサーバーのデータにアクセスするため、システム管理者はこのパスワードを入力する必要があります。
重要
このパスワードを保存し、安全に保管してください。この指示に従わない場合、モバイルサーバーのデータを復元する機能が損なわれる可能性があります。
調査をパスワードで保護したくない場合は、モバイルサーバーのデータ保護パスワードを使用しないことを選択し、調査が暗号化されないことを理解しましたを選択します。
[en] V. Recording server settings
レコーディングサーバーの設定ページで、さまざまなレコーディングサーバーの設定を行います。
レコーディングサーバー名フィールドに、レコーディングサーバー名を入力します。デフォルトでコンピュータ名になっています。
マネジメントサーバーのアドレスフィールドにマネジメントサーバーのアドレスとポート番号が表示されます:localhost:80
メディアデータベースの場所の選択フィールドで、ビデオ録画を保存する場所を選択します。ビデオ録画は、プログラムをインストールする場所とは別の、システムドライブ以外の場所に保存することをMilestoneは推奨します。デフォルトの場所は、空き容量が最も多いドライブです。
ビデオ録画の保存期間フィールドで、録画を保存する期間を設定します。1日から365,000日の間の日数を入力できます。デフォルトの保存期間は7日間です。
[en] VI. Encryption
暗号化を選択ページでは、以下の通信フローを保護できます。
レコーディング サーバー、データコレクター、マネジメントサーバー間
内部通信フローで暗号化を有効にするには、サーバー証明書セクションで証明書を選択します。
重要
レコーディングサーバーからマネジメントサーバーへの通信を暗号化する場合、システムは、マネジメントサーバーからレコーディングサーバーへの通信も暗号化するよう求めます。
レコーディングサーバーとクライアント間
レコーディング サーバーと、レコーディング サーバーからデータ ストリームを受け取るクライアントコンポーネント間の暗号化を有効にするには、ストリーミングメディア証明書セクションで証明書を選択します。
モバイルサーバーとクライアント間
モバイルサーバーからデータ ストリームを取得するクライアントコンポーネント間の暗号化を有効にするには、モバイルストリーミングメディア証明書セクションで証明書を選択します。
イベントサーバーと通信するコンポーネントとイベントサーバー間
イベントサーバーと通信するコンポーネント(LPRサーバーを含める)とイベントサーバー間の暗号化を有効にするには、イベントサーバー&拡張機能セクションで証明書を選択します。
すべてのシステム コンポーネントに対して同じ証明書を使用することも、システムコンポーネントごとに異なる証明書を使用することもできます。
インストール後、通知エリアのManagement Server Managerトレイ アイコンのServer Configuratorから暗号化を有効にすることもできます。
[en] VII. Server logs
[en] On the Server logs setup page, specify the following parameters:
[en] Open Telemetry Protocol (OTLP) endpoint
[en] Log language - the display language for the logs
[en] Log level - select between Standard (uses less storage) or Extended (collects more data)
[en] Retention period - how long the database should keep the log entries
[en] Enable or disable to use Open Telemetry Protocol for server logs.
[en] VIII. Location and language
[en] On the Select file location and product language page, do the following:
[en] In the File location field, select the location where you want to install the software.
Note
[en] If any Milestone XProtect VMS product is already installed on the computer, this field is disabled. The field displays the location where the component will be installed.
[en] In Product language, select the language in which to install your XProtect product.
[en] Click Install.
[en] The software now installs. If not already installed on the computer, Microsoft® SQL Server® Express and Microsoft IIS are automatically installed during the installation.
コンピュータを再起動するよう指示される場合があります。コンピュータの再起動後、セキュリティ設定によって1つまたは複数のWindowsセキュリティ警告が表示される場合があります。許可すると、インストールが完了します。
[en] IX. Add hardware and users
[en] When the installation completes, a list shows the components that are installed on the computer.
[en] Click Continue to add hardware and users to the system.
Note
[en] If you click Close now, you bypass the configuration wizard and XProtect Management Client opens. You can configure the system, for example add hardware and users to the system, in Management Client.
[en] On the Enter user names and passwords for hardware page, enter the user names and passwords for hardware that you have changed from the manufacturer defaults.
[en] The installer scans the network for this hardware as well as hardware with manufacturer default credentials.
[en] Click Continue and wait while the system scans for hardware.
[en] On the Select the hardware to add to the system page, select the hardware that you want to add to the system. Click Continue and wait while the system adds the hardware.
[en] On the Configure the devices page, you can give the hardware descriptive names by clicking the edit icon next to the hardware name. This name is then prefixed to the hardware devices.
[en] Expand the hardware node to enable or disable the hardware devices, such as cameras, speakers, and microphones.
Note
[en] Cameras are enabled by default, and speakers and microphones are disabled by default.
[en] Click Continue and wait while the system configures the hardware.
[en] On the Add users page, you can add users to the system as Windows users or basic users. The users can have either the Administrators role or the Operators role.
[en] Define the user and click Add.
[en] When you are done adding users, click Continue.
[en] When the installation and initial configuration are done, the Configuration is complete page appears, where you see:
[en] A list of hardware devices that are added to the system
[en] A list of users who are added to the system
[en] Addresses to the XProtect Web Client and XProtect Mobile client, which you can share with your users
[en] When you click Close, XProtect Smart Client opens and is ready to use.